LuDong Mine Machinery Co., Ltd.
Mobile: 86-13589789857
Product center
BS-K flotation machine
BS-K flotation machine
Advantages:
U-shaped tank body, evenly stirred, not easy to deposit;
The structure is simple, the adjustment is convenient; the energy consumption is low;
A suction tank is configured at the same level to form a separate flotation circuit. No foam pump required;
The slurry has good cycle performance, uniform air dispersion, stable foam suspension and low consumption of chemicals;
Equipped with advanced slurry level control system, operation and adjustment of gas supply and drug delivery, automatic control can be realized.
working principle:
When the flotation machine is working, with the rotation of the impeller, the slurry in the tank is sucked from the bottom of the tank through the bottom of the tank from the lower end of the impeller to the air distributor of the low-pressure air fed by the blower between the impeller blades through the hollow shaft and the impeller chamber. among them. After the slurry and air are thoroughly mixed between the blades, they are pushed upward from the periphery of the upper half of the impeller, and the stator is stabilized and oriented to enter the entire trough. The bubble rises to the foam stable zone, and after the mineralization is enriched, it overflows from the overflow weir. Another part of the slurry flows to the lower part of the impeller, and is stirred and remixed to form mineralized bubbles. The remaining slurry flows down the tank until it eventually becomes tailings.
Technical Parameters:
|
BS-K flotation machine technical parameter table |
|||||||
|
型號 |
槽體容積（m3） |
轉子速度（r/min） |
風壓（mpa） |
處理量（m3/min） |
電機功率（kw） |
內部尺寸（mm） |
單槽重量（kg） |
|
mode |
volume |
rotational of rotor |
wind pressure |
processing capacity |
motor power |
inner dimension |
W of single tank |
|
BS-K2.8 |
2.8 |
248 |
0.015 |
0.4-3 |
Y160M2-8/5.5 |
1550×1550×1350 |
1740 |
|
BS-K4 |
4 |
210 |
|
0.5-4 |
Y160L-8/7.5 |
1850×1850×1550 |
2568 |
|
BS-K8 |
8 |
180 |
|
1.0-8 |
Y180L-6/15 |
2350×2350×1950 |
4460 |
|
BS-K16 |
16 |
160 |
|
2.0-15 |
Y250M-8/30 |
2800×2800×2400 |
9231 |
|
BS-K24 |
24 |
154 |
|
7.0-20 |
Y280S-8/37 |
3200×3200×2800 |
11107 |
PRODUCT CENTER
NEWS
SERVICE
Tel:+86-535-8117966 Phone:+86-13589789857（Mr Cao） E-mail: ldkuangji@163.com Add: No. 189, Zhaojin Road, Zhaoyuan City, Shandong Province, China
Copyright © LuDong Mine Machinery Co., Ltd. 魯ICP備09077777號-1
ABOUT US